MAHO MH700 S Parameter help.
Close
Login to Your Account
Likes Likes:  0
Results 1 to 6 of 6
  1. #1
    Join Date
    Mar 2014
    Location
    BLACK MOUNTAIN NORTH CAROLINA USA
    Posts
    360
    Post Thanks / Like
    Likes (Given)
    356
    Likes (Received)
    234

    Default MAHO MH700 S Parameter help.

    I recently acquired a Maho MH 700 S machine . It had been setting without power for several months. We put power to it, and after a lot of cleaning and leak repairs it came to life ! I actually ran a couple of jobs. The batteries had saved the parameters ! HALLELUJAH !!!!
    Well as fate would have it I powered down the machine over Christmas break, and when powering back up, it appears the battery's went to Hell and a Handbasket ! Of course I never got around to doing a parameter back-up. Now after searching the books and STUFF that came with the machine , I cannot find a list of the parameters.
    I am wondering if any of you wonderful PM members, might have such a list ? or might have a clue where I may find such a list ?
    Now I am dead in the water.

    Thank you for taking time to read this. Ed at AppTool
    Attached Thumbnails Attached Thumbnails maho1.jpg  

  2. #2
    Join Date
    Mar 2014
    Location
    BLACK MOUNTAIN NORTH CAROLINA USA
    Posts
    360
    Post Thanks / Like
    Likes (Given)
    356
    Likes (Received)
    234

    Default

    No Reply's ? Surely there are some Maho 700s out there ?

  3. #3
    Join Date
    Mar 2014
    Location
    BLACK MOUNTAIN NORTH CAROLINA USA
    Posts
    360
    Post Thanks / Like
    Likes (Given)
    356
    Likes (Received)
    234

    Default

    After further review , I am hoping the previous owner my have them on a disk ? I will find out soon. They are called constants, not parameters. Maybe one of you fine fellows might enlighten me as well, about the (tape) in the control panel ? It is marked machine constants , so I presume they are on the tape ? But I am just an old dumb hillbilly from the Mtns, and have never seen such a tape. It, is a thin metal tape , nothing like the paper tapes I saw, or even helped some of my old supervisors install on the old NC and old CNCs from years back.
    Is there anywhere I could run this metal tape and get the constants ?
    Thanks again for taking time to read this, Ed from the Mtns of NC

  4. #4
    Join Date
    Mar 2014
    Location
    BLACK MOUNTAIN NORTH CAROLINA USA
    Posts
    360
    Post Thanks / Like
    Likes (Given)
    356
    Likes (Received)
    234

    Default

    Got them ! came from GE previous owner had them , thank goodness, should anybody ever need Maho700 S or Maho1000 S constants , I will be glad to share . Happy machining guys !

  5. #5
    Join Date
    Jun 2011
    Location
    Zagreb, Croatia
    Posts
    2
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Could u send me the parameters for Maho MH700 S

    Many thanks in advance

  6. #6
    Join Date
    Aug 2019
    Country
    POLAND
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Hello,
    I have Maho MH700s, cnc 432, 4 axis and ATC 36 slots. Can you help me, parameters from 0 to 217 was lost.
    Thank you in advance.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •