Hello everybody,
I have a MH-63 that I am having an issue with, I am getting an EX0159 Arm Home position LS. Off ATC alarm. The tool changer when running a program with have both tools in the changer arm however it stops and alarms shortly after pulling the tool out of the spindle. However the tools can be changed manually without any issues. I have gone through the contactors there are no issues there, I have a feeling this is either a switch a proximity sensor however the manual we have for this machine is slightly better than a paper weight so I am having a hard time figuring out the location of these sensors or switches. If anybody could help me with this one I would greatly appreciate it or any other ideas what this gremlin might be.
Thanks for your help guys!
I have a MH-63 that I am having an issue with, I am getting an EX0159 Arm Home position LS. Off ATC alarm. The tool changer when running a program with have both tools in the changer arm however it stops and alarms shortly after pulling the tool out of the spindle. However the tools can be changed manually without any issues. I have gone through the contactors there are no issues there, I have a feeling this is either a switch a proximity sensor however the manual we have for this machine is slightly better than a paper weight so I am having a hard time figuring out the location of these sensors or switches. If anybody could help me with this one I would greatly appreciate it or any other ideas what this gremlin might be.
Thanks for your help guys!