micmeadow
Plastic
- Joined
- Oct 31, 2018
Hello everyone,
I'm looking for infos about the machines in the title.
We are planning to upgrade our factory with a multitasking machine and were looking to the Beta/Gamma 1250.
We are definitely sure about getting a machine with a milling spindle and a lower turning turret. We are in a production environment of small to medium volume (from 30 to 3000 pieces) and the flexibility of the machine is a must. We need to use a tailstock mounted on the turret sometimes, as well as working on both spindles contemporary.
Even if we have had okuma and still are totally happy with those lathes, the cost of a Multus U3000 is unfortunately too high for what we can afford. We need a Multitasking machine with 2 turning spindles (main+sub) ASA8/ASA6, a 20bar coolant pump, linear scales on all axis, skiving module, 12/15000 rpm milling spindle and very rigid and solid roller guides due to interrupted cut on 90% of the pieces (this is mostly for turning). Working mostly 18NiCrMo5 to 42CrMn
So, if any CTX user could give me a feedback about his machine, and about how rigid and precise (repeatability focused) it is that'd be very helpful.
I know here in the forum there are a lot of great machinists and multitasking operators so wish you could help!
Thanks a lot to anyone who's going to help!
M.
Inviato dal mio Mi MIX 2S utilizzando Tapatalk
I'm looking for infos about the machines in the title.
We are planning to upgrade our factory with a multitasking machine and were looking to the Beta/Gamma 1250.
We are definitely sure about getting a machine with a milling spindle and a lower turning turret. We are in a production environment of small to medium volume (from 30 to 3000 pieces) and the flexibility of the machine is a must. We need to use a tailstock mounted on the turret sometimes, as well as working on both spindles contemporary.
Even if we have had okuma and still are totally happy with those lathes, the cost of a Multus U3000 is unfortunately too high for what we can afford. We need a Multitasking machine with 2 turning spindles (main+sub) ASA8/ASA6, a 20bar coolant pump, linear scales on all axis, skiving module, 12/15000 rpm milling spindle and very rigid and solid roller guides due to interrupted cut on 90% of the pieces (this is mostly for turning). Working mostly 18NiCrMo5 to 42CrMn
So, if any CTX user could give me a feedback about his machine, and about how rigid and precise (repeatability focused) it is that'd be very helpful.
I know here in the forum there are a lot of great machinists and multitasking operators so wish you could help!
Thanks a lot to anyone who's going to help!
M.
Inviato dal mio Mi MIX 2S utilizzando Tapatalk