Hi there
I am working on an 8-Axis lathe, Gildemeister GAC65 Series(1995). I've been repaired Spindle & servo drives, Monitor, EMG-Cards then and reloaded the machine.
the battery was health after 8years being off, but the memory was erased.
now, I can jog the machines axis but when I want to go to the reference point, the machine doesn't react and keep moving until the Termall-trip microswitch action.
it happens on my all axis, I also change the motor and drive but nothing happened.
I find a piece of paper, which is about: "to avoid involves moving the encoder then the reference point will require resetting."
unfortunately, documents are corrupted.
Does anybody have the same experience or suggestion?
All the Best
R.Teimouri
I am working on an 8-Axis lathe, Gildemeister GAC65 Series(1995). I've been repaired Spindle & servo drives, Monitor, EMG-Cards then and reloaded the machine.
the battery was health after 8years being off, but the memory was erased.
now, I can jog the machines axis but when I want to go to the reference point, the machine doesn't react and keep moving until the Termall-trip microswitch action.
it happens on my all axis, I also change the motor and drive but nothing happened.
I find a piece of paper, which is about: "to avoid involves moving the encoder then the reference point will require resetting."
unfortunately, documents are corrupted.
Does anybody have the same experience or suggestion?
All the Best
R.Teimouri