What's new
What's new

Seiki VM 50 stuck pallet

Muciek

Plastic
Joined
Nov 25, 2017
Hello, I have a problem with my vm50 (lambda 10m controller) during pallet change the emergency button was pushed . Now to do anything I need to do the referencing of all Axis , but the Y Axis is locked and cannot move either way. In system info IT says that Y is interlocked . Also when machine is turned on ,the table is moving up like it was preparing for the pallet swap. Any help would be appriciated.

Wysłane z mojego Redmi 4A przy użyciu Tapatalka
 
Dont know parameters for your machine/control but you have to disable your pallet changer and manualy bring it into position to lock it. Maybe some one has a procedure for your control.
 
Dont know parameters for your machine/control but you have to disable your pallet changer and manualy bring it into position to lock it. Maybe some one has a procedure for your control.
I have already fixed It , needed to go into mainteance mode , then using m codes from range 9xx ,lowered the table Andrzej everything was fine.

Wysłane z mojego Redmi 4A przy użyciu Tapatalka
 








 
Back
Top