ihavenofish
Cast Iron
- Joined
- Jul 23, 2011
- Location
- toronto
so, as from the other thread, im scrapping the frame of the maho mc5hs.
my machine is odd it got steel ways bolted to the saddles. i was wondering if i could unbolt the X ways - upper and dovetail - and keep them as straight edge references.
does anyone know if they should come off, or are they epoxied or bonded on. the Z steel way on the ram does seem to be bonded.
thanks
my machine is odd it got steel ways bolted to the saddles. i was wondering if i could unbolt the X ways - upper and dovetail - and keep them as straight edge references.
does anyone know if they should come off, or are they epoxied or bonded on. the Z steel way on the ram does seem to be bonded.
thanks