anyone with experience running any of these agie machines give me some info because what im being taught by someone, doesn't make any sense to me.
when edge finding I noticed the lad teaching me has a added value of 0.5 in the measure cycle.
after edge finding is done he enters 0.5 mm in the opposite direction + half of the wire thickness.
sax,p,x-0.625. (measuring something on the right hand side of the table --> [ )
surely you would just need to edge find with no added value in the measuring cycle and the machine should work out the centre according to whatever wire thickness. ive used an AC classic and thats how it works on there.
Cheers
when edge finding I noticed the lad teaching me has a added value of 0.5 in the measure cycle.
after edge finding is done he enters 0.5 mm in the opposite direction + half of the wire thickness.
sax,p,x-0.625. (measuring something on the right hand side of the table --> [ )
surely you would just need to edge find with no added value in the measuring cycle and the machine should work out the centre according to whatever wire thickness. ive used an AC classic and thats how it works on there.
Cheers