wireman08
Plastic
- Joined
- Nov 16, 2017
- Location
- Newport News Va
At the very beginning of a job when the machine is filling up the tank the bottom water nozzle begins to spray at high pressure (shooting over the door and onto the floor)Before the tank is full.
Doesn’t matter what I have the pressure set to, as soon as the cut begins it goes to whatever pressure has been programed for the entry cut.
I have tried lowering all the pressure settings, but they do not seem to apply to when the tank is filling.
It doesn’t do this if I manually fill the tank to check the level.
Thanks. David.
Doesn’t matter what I have the pressure set to, as soon as the cut begins it goes to whatever pressure has been programed for the entry cut.
I have tried lowering all the pressure settings, but they do not seem to apply to when the tank is filling.
It doesn’t do this if I manually fill the tank to check the level.
Thanks. David.