Charmilles Fl440ccS axes greasing cycle
Close
Login to Your Account
Likes Likes:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2021
    Country
    UNITED KINGDOM
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default Charmilles Fl440ccS axes greasing cycle

    I have a CHarmilles Fl440ccS Wire EDM machine that runs millennium software. I am in the middle of a job that can't be removed from the tank until it is complete but the alarm F1402 (axes greasing mandatory) has popped up without any warning. The machine will not run a program until the greasing cycle has been run. To run the greasing cycle, I would have to remove the work piece from the machine, which I cannot do without losing my location as the piece has no clean reference points to pick up.

    Does anyone know of a way around the greasing cycle? I can run it after this very short program has finished.

    Cheers,
    Adam

  2. #2
    Join Date
    May 2018
    Country
    UNITED STATES
    State/Province
    South Carolina
    Posts
    10
    Post Thanks / Like
    Likes (Given)
    3
    Likes (Received)
    2

    Default

    I believe changing parameter D1408 from 72 to -1 will disable greasing cycles. May not work when its already mandatory though.

  3. #3
    Join Date
    Mar 2019
    Country
    UNITED KINGDOM
    Posts
    294
    Post Thanks / Like
    Likes (Given)
    2
    Likes (Received)
    75

    Default

    I used to run a charmilles and you could start the greasing cycle and stop it after 5 seconds and it’ll cancel the alarm, does your work piece allow that?


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •