Charmilles Robofil 440 Re-thread Issue
Close
Login to Your Account
Likes Likes:  0
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2015
    Country
    UNITED KINGDOM
    Posts
    10
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default Charmilles Robofil 440 Re-thread Issue

    Got an issue with a Robofil 440, the machine will cut and re-thread, however when it breaks the wire and goes to spool up around the "forks" in the rethread block it spins maybe 1-2 times then stops and comes up with the re-thread failure.

    Have replaced the re-thread module and the re-thread cable.
    Any ideas?

  2. #2
    Join Date
    Jun 2014
    Location
    WEST MICHIGAN
    Posts
    25
    Post Thanks / Like
    Likes (Given)
    8
    Likes (Received)
    1

    Default

    We need to check io of positioning switch of module on fanuc page

    Sent from my LM-X410PM using Tapatalk


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •