CHARMILLES ROBOFIL- slow machining speed.
Close
Login to Your Account
Likes Likes:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2017
    Country
    LATVIA
    Posts
    55
    Post Thanks / Like
    Likes (Given)
    10
    Likes (Received)
    14

    Default CHARMILLES ROBOFIL- slow machining speed.

    Friends have this machine- CHARMILLES ROBOFIL 240 SLP with following problem: they can't get to previous machining speeds, now they say it stays maximum at 30% on all thicknesses. I know that they have changed power feeder cables a time ago before it started. Maybe someone can give an idea of ​​the reasons for such machine behaviour and where to start?

  2. #2
    Join Date
    Nov 2014
    Country
    UNITED STATES
    State/Province
    Florida
    Posts
    4,722
    Post Thanks / Like
    Likes (Given)
    1824
    Likes (Received)
    2266

    Default

    Not sure of that model number, but assuming it has similarites with their other models..

    Check power contacts, ground cables. Custom tec file, or machine generated? Could be a programming error on stock thickness, wire type, or wrong tec file (material and or wire type incompatible). Could also look at FF value, should by default be at 100 (at least on a 290 and 310)...

  3. #3
    Join Date
    Nov 2017
    Country
    LATVIA
    Posts
    55
    Post Thanks / Like
    Likes (Given)
    10
    Likes (Received)
    14

    Default

    Looks like exactly what I said to them to check. They ordered new power contacts as those already installed are under question. With ground cables do You mean those connected to table (workpiece)?


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •