Bronislaw
Plastic
- Joined
- Nov 9, 2010
- Location
- Canada, Québec
Hi everyone.
We had a JAPAX LUX3 with a power supply FE02 but too many things were defect
so we have been able to find another identical. The problem is when we load the program and we select
the LPT ( parallel port), it doesn't seem to go read onto our buffer. The computer send the program into the buffer we see
the lights are working.
The parallel cable is connected behind the FE02 power supply.
Is there a way to debug parallel port to see if it works or are there jumper settings for the LPT somewhere in the japax ?
We had a JAPAX LUX3 with a power supply FE02 but too many things were defect
so we have been able to find another identical. The problem is when we load the program and we select
the LPT ( parallel port), it doesn't seem to go read onto our buffer. The computer send the program into the buffer we see
the lights are working.
The parallel cable is connected behind the FE02 power supply.
Is there a way to debug parallel port to see if it works or are there jumper settings for the LPT somewhere in the japax ?
