Mits DWC90C1 trouble shooting
Close
Login to Your Account
Likes Likes:  0
Results 1 to 1 of 1
  1. #1
    Join Date
    Apr 2007
    Country
    UNITED STATES
    State/Province
    South Carolina
    Posts
    5
    Post Thanks / Like
    Likes (Given)
    1
    Likes (Received)
    0

    Exclamation Mits DWC90C1 trouble shooting

    I hope someone has some experience with this problem: I got this new to me machine hooked up & running, but it only cuts very slow, around .012"/min in 1/2" steel. It did start cutting fast (.117"/min) one time, and I was so amazed that I stopped the machine to admire the work piece, and when I started cutting again it cut very slowly again. While cutting I have checked the voltage and it was corresponding to the control screen reading of 49V. I haven't found anywhere to check the amperage as the cables are all shielded. So far, I have checked the power feed contacts, dielectric resistivity,any fuse I can find, various circuit board cable connections,

    Does anyone have any ideas? Pulling my hair out here


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •