The company I work for bought a new MV about 7 months ago and since we've put about 1500 hours on it. The issue is as of semi recently at around 30-35 hours into a maintenance cycle the wire begins to hang up on the lower guide C right after the carbide it appears. with the old 110 ha we had tons of issues with threading but this machine has been a dream until now. I clean all the diamonds with an ultrasonic and ac500 every 80-100 hours generally depending on how its running and threading. Am I missing something in my maintenance routine or any other tips and tricks to make this issue subside?
Thanks
Grant
Thanks
Grant