What's new
What's new

Mitsubishi EA12E Sinker anybody got one?

William Ward

Cast Iron
Joined
Mar 28, 2003
Location
Upland, California,USA
Mitsubishi EA12E Sinker, anybody got one?
I'm asking because I need to reset the machine home position for the C Axis.
System software version is: BRD-M43W581-AO
Replaced the o-rings in the 3R spindle draw tube. It's now out by 1.2812 Degrees at the Home position.
There has to be an easy way to set this.
Thanks
 
Mitsubishi EA12E Sinker, anybody got one?
I'm asking because I need to reset the machine home position for the C Axis.
System software version is: BRD-M43W581-AO
Replaced the o-rings in the 3R spindle draw tube. It's now out by 1.2812 Degrees at the Home position.
There has to be an easy way to set this.
Thanks

Have you tried to contact Mitsu service? They have always been very helpful with me regarding my wire machines.
 
I can tell you on the older X series, might be same idea on your EA.. Turn user maintenance switch ON. Then navigate to: Alarm maintenance screen, next menu, Org-Para

The G28sft value for C will be the offset value.

I could go thru the actual procedure if you need help.
 








 
Back
Top