SINUMERIKO
Plastic
- Joined
- Jan 12, 2009
- Location
- SPAIN
Hello gentlemen,
I have the opportunity to fix a Charmilles Robofil 300 WEDM with a Charmilles controller right on these days, and say 'have the opportunity' because hopefully it will the first of this kind I ever fix, I have good experience on other CNC's tough, lathes, mills, etc.
This machine has the alarm 'No dialog with CCU COM - Check LED code'
Since I don't have the maintenance manual or anything where I can interpretate what the status leds are telling me, I believe I will have to reload the system thru the disks, wich are:
1.-MKE6.5E/8059580F/ROBOFIL 290/3X0/5X0/COMMUNICATIONS SOFTWARE/COM:MNA5X/EXE:MN99/PIL:FP18/CTUS2/8/99/DISK1
2.-MKE6.5E/8060830D/ENGLISH LANGUAGE (ENGLISH.CMD)/TECHNO MN67/WIRE MN66/CTUS2/8/99/DISK 2
3.-MKE6.5E/8062060A/TECHNO DOC FILES/DOC MN67/CTUS2/8/99
4.-AUTO DIAGNOSTIC/ROBOFIL 290/3X0/5X0/BRASS GENERATOR/#8062170/VER:3GV10/CTUS2/8/99/DISK 1OF 1
...and here is exactly where I'll need all the help you can give me, cause I have these doubts:
Are these all the required system disks?
How do I tell the machine to start floppy-reading?
Every single piece of information will be very appreciated.
Thanks in advance
I have the opportunity to fix a Charmilles Robofil 300 WEDM with a Charmilles controller right on these days, and say 'have the opportunity' because hopefully it will the first of this kind I ever fix, I have good experience on other CNC's tough, lathes, mills, etc.
This machine has the alarm 'No dialog with CCU COM - Check LED code'
Since I don't have the maintenance manual or anything where I can interpretate what the status leds are telling me, I believe I will have to reload the system thru the disks, wich are:
1.-MKE6.5E/8059580F/ROBOFIL 290/3X0/5X0/COMMUNICATIONS SOFTWARE/COM:MNA5X/EXE:MN99/PIL:FP18/CTUS2/8/99/DISK1
2.-MKE6.5E/8060830D/ENGLISH LANGUAGE (ENGLISH.CMD)/TECHNO MN67/WIRE MN66/CTUS2/8/99/DISK 2
3.-MKE6.5E/8062060A/TECHNO DOC FILES/DOC MN67/CTUS2/8/99
4.-AUTO DIAGNOSTIC/ROBOFIL 290/3X0/5X0/BRASS GENERATOR/#8062170/VER:3GV10/CTUS2/8/99/DISK 1OF 1
...and here is exactly where I'll need all the help you can give me, cause I have these doubts:
Are these all the required system disks?
How do I tell the machine to start floppy-reading?
Every single piece of information will be very appreciated.
Thanks in advance