Roborules45
Plastic
- Joined
- Jan 23, 2020
Sorry if this is a very basic question, but I have no experience with the wire EDM process.
In making a wire EDM cut would the "kerf" width be equivalent on each side of the wire as it cuts - would the thickness of the recast layer on each opposing cut face be equal thickness. If symmetric in general or straight cuts, would these attributes become asymmetric around radius or curve cuts.
Application I'm considering is 403 SS, about 1.5 inches thick.
thanks.
In making a wire EDM cut would the "kerf" width be equivalent on each side of the wire as it cuts - would the thickness of the recast layer on each opposing cut face be equal thickness. If symmetric in general or straight cuts, would these attributes become asymmetric around radius or curve cuts.
Application I'm considering is 403 SS, about 1.5 inches thick.
thanks.