adamfischer
Plastic
- Joined
- Apr 9, 2019
We bought a 1/4 - 12' Mechanical Shear at auction. The exact model # is wore off. The machine was wired for 380volt Canadian. We put a transformer in and the machine will power up. The blade will go up and down but wont stop unless you shut it off and then it slowly stops. We initially thought it was the brake but adjusting that didn't help. I feel like there is something that would disengage the gear inside (from limited research) but I cannot figure out how it works or where to start. Any insite would be greatly appreciated.
Adam
Adam