Linde HDA 200 Welder

oldwheels63 · Mar 15, 2020

Linde HDA 200 Welder works great on stick but the high freq does not. Have not got into all the bits and pieces of the circuit but one of the filter circuit capacitors is burnt out. It does not have a rating printed on it. Does any one know the rating? It is a large oil filled capacitor. It is bulged and blackened on top. Also I would like to get a manual. I have the schematic but no legend to tell me the items. It nay be a GE 49E6036, which I can't find one or it's rating.on

cyanidekid · Mar 15, 2020

oldwheels63 said:
Linde HDA 200 Welder works great on stick but the high freq does not. Have not got into all the bits and pieces of the circuit but one of the filter circuit capacitors is burnt out. It does not have a rating printed on it. Does any one know the rating? It is a large oil filled capacitor. It is bulged and blackened on top. Also I would like to get a manual. I have the schematic but no legend to tell me the items. It nay be a GE 49E6036, which I can't find one or it's rating.on

Consider that cap to be hazardous could be PCBs in there

oldwheels63 · Mar 15, 2020

Yes I know and have to be careful about disposal. It's not leaking.

dana gear · Mar 17, 2020

Try this, go to esab web site, Welding Equipment ESAB North America | ESAB Welding & Cutting
In the search box upper right hand corner type in HDA-200. The entire operators/parts/service manuals is there.
The esab form your looking for is F-11-412D.
No hi frequency, are you sure your not looking at the capacitor in the high voltage transformer circuit for the high freq?

Search

Largest Manufacturing Technology Community on the Web

Search

Linde HDA 200 Welder

oldwheels63

Plastic

cyanidekid

Titanium

oldwheels63

Plastic

dana gear

Hot Rolled

Similar threads