Di-Acro Stomp Shear Mounting

Jason H · May 20, 2020

Hi All,

Just got in this 42" Di-Acro for cutting sheets of HDPE and LDPE. Can this be operated without drilling and mounting to the concrete.

if I could mount it to something else I would love it but will drill the floor if needed......

Thanks

Jason

jamesclerie · May 20, 2020

Stomp Away Never have I ever bolted mine down. Doesn't move at all

bsg · May 21, 2020

I have never seen one bolted to the floor either.....I have seen them bolted to 2' x 4's to extend the footprint?

Kevin

neilho · May 21, 2020

Mine moves around a bit - I just move it back

moonlight machine · May 22, 2020

In theory they should be bolted down, once it is bolted down the blade clearance can be set and it will stay set. This probably only matters if you are shearing very thin materials. If you adjust the blade clearance to shear .005 brass with no burr and the shear moves the blades could hit. I only cut .035 to .062 and the clearance is set to give a burr free cut on .050 steel so not much chance the blades will hit if it moves around as the floor is flat and smooth where it is sitting. So mine is not bolted down ether.

dana gear · May 24, 2020

Jason H said:
Hi All,

Just got in this 42" Di-Acro for cutting sheets of HDPE and LDPE. Can this be operated without drilling and mounting to the concrete. View attachment 289193

if I could mount it to something else I would love it but will drill the floor if needed......

Thanks

Jason

HDPE/LDPE, Put the shear where you want it and shear away.

Search

Largest Manufacturing Technology Community on the Web

Search

Di-Acro Stomp Shear Mounting

Jason H

Stainless

jamesclerie

Plastic

bsg

Titanium

neilho

Titanium

moonlight machine

Diamond

dana gear

Hot Rolled

Similar threads