M.B. Naegle
Diamond
- Joined
- Feb 7, 2011
- Location
- Conroe, TX USA
I have a bag of these that were rolling around the bottom of our welding tool box. They all look new and I THINK they are MIG welder gun tips, but they don't match anything I've ever seen and I can't find anything Googling...
Most are solid copper, 1/2" Hex Stock, 1 1/2" overall length, however two are brass with a copper center. The solid copper ones have "035" stamped on one side (what leads me to think they are MIG wire feed related) as well as a small squiggle that looks like an outline of Ohio (too small for my tablet camera to get). The brass ones have "926739-3-045" stamped on one side. They all have a 3/8" course female thread on the back.
Any idea what they go to? We have a Miller MIG set-up. They might be leftover from an old gun assembly or some other welder that was in the shop before I was.
Most are solid copper, 1/2" Hex Stock, 1 1/2" overall length, however two are brass with a copper center. The solid copper ones have "035" stamped on one side (what leads me to think they are MIG wire feed related) as well as a small squiggle that looks like an outline of Ohio (too small for my tablet camera to get). The brass ones have "926739-3-045" stamped on one side. They all have a 3/8" course female thread on the back.
Any idea what they go to? We have a Miller MIG set-up. They might be leftover from an old gun assembly or some other welder that was in the shop before I was.