jackal
Titanium
- Joined
- May 4, 2006
- Location
- northwest ARK
A place I worked at had bought (2) Victor cuttting torch sets about 1 year ago.
One set was a small body on the torch about 3/4" diameter (I believe an FC 100 torch body)
The other set had a large body about 1" to 1 1/8", but I don't know which one it was. All of the pics they show on the internet are the Fc 100 body . They seem to show this picture no matter what the set is.
I need to know if it is the Firepower, Journeyman 1 or 2, Cutmaster, etc.
Also is the large body the 270 fc or 310 fc, or something else?
I figure Macona and a few others will know this right away.
Thanks for the great info,
JAckal
These were the sets in the green box with stainless covered walls.
One set was a small body on the torch about 3/4" diameter (I believe an FC 100 torch body)
The other set had a large body about 1" to 1 1/8", but I don't know which one it was. All of the pics they show on the internet are the Fc 100 body . They seem to show this picture no matter what the set is.
I need to know if it is the Firepower, Journeyman 1 or 2, Cutmaster, etc.
Also is the large body the 270 fc or 310 fc, or something else?
I figure Macona and a few others will know this right away.
Thanks for the great info,
JAckal
These were the sets in the green box with stainless covered walls.