Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I have a similar press (mine is a rg-103) but the controller is different (hurco auto bend 5). If you have question feel free to ask.
I'm having some issues with the foot control on mine. The foot control appears to be hydraulic, and it seems to be working weakly / sporadically, almost like bad brakes on a car that you need to pump. Sometimes you depress it and the ram comes up strongly, sometimes weakly (the ram rises partially and then you hear what sounds like hydraulic fluid bypassing), many times not at all. I'm thinking there is air in the control line or it is otherwise lossy in some way. I haven't done any really high tonnage bending yet, but it does seem that when it works it is able to generate reasonable force. I guess it is possible that the tonnage / max pressure control isn't working right instead. I have it maxed out right now though.
Notice
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.