We have a Lincoln 255 mig welder. I want to weld some 1/2" plate for fixtures and use spray transfer.
The machine is somewhat under powered for this application. If I get a 90/10 gas mix, I will be able to use spray transfer.
If later, I want to weld some 1/8" wall square tubing, using short circuit transfer, can I still use this gas? I would like to have only one bottle of gas in the shop for convenience, but I do not know if this is practical.
We weld only a few times a month and the material is A36 or 1018 steel.
Thanks in advance for all replies.
The machine is somewhat under powered for this application. If I get a 90/10 gas mix, I will be able to use spray transfer.
If later, I want to weld some 1/8" wall square tubing, using short circuit transfer, can I still use this gas? I would like to have only one bottle of gas in the shop for convenience, but I do not know if this is practical.
We weld only a few times a month and the material is A36 or 1018 steel.
Thanks in advance for all replies.