cattledog
Plastic
- Joined
- May 3, 2012
- Location
- ON, CANADA
Hi: how difficult is it to realign the c-axis?
offset is way off from factory setting of .024.
was under minus zero/ now plus .05
other problems in the cut as well
does this have anything to do with the c-axis?
moved to cheaper sand instead of barton
not great cut thru anymore.
thanks
offset is way off from factory setting of .024.
was under minus zero/ now plus .05
other problems in the cut as well
does this have anything to do with the c-axis?
moved to cheaper sand instead of barton
not great cut thru anymore.
thanks