Grits
Stainless
- Joined
- Dec 14, 2004
- Location
- Little Rock, Arkansaw
Hello Everyone.
Now that I have a TIG welder I have been thinking about all the things I could build with a tubing bender. I have several projects that would require one. My primary project is a T-Top for my Center console boat.
Speed is not a concern because I am a hobbyist; however I would like something that is somewhat accurate and repeatable. I would like to bend up to 2" SS with a wall thickness of no more than 1/8 inch. Most of the two inch material would actually be half that.
I appreciate all and any advise yall will offer.
Thanks,
Grits
Now that I have a TIG welder I have been thinking about all the things I could build with a tubing bender. I have several projects that would require one. My primary project is a T-Top for my Center console boat.
Speed is not a concern because I am a hobbyist; however I would like something that is somewhat accurate and repeatable. I would like to bend up to 2" SS with a wall thickness of no more than 1/8 inch. Most of the two inch material would actually be half that.
I appreciate all and any advise yall will offer.
Thanks,
Grits