"more" on handheld fiber laser
Close
Login to Your Account
Results 1 to 9 of 9
  1. #1
    Join Date
    Jun 2006
    Location
    Near Seattle
    Posts
    4,976
    Post Thanks / Like
    Likes (Given)
    3433
    Likes (Received)
    1422

    Default "more" on handheld fiber laser

    The handheld fiber laser welders came up before (I forget which sub forum) but I just came upon this video which struck me as mildly interesting.
    In that environment, with everybody wearing the relevent glasses, it didn't look any more dangerous than Tig welding.
    (And just like Tig you'd really like proper screening so passers by don't get flashed.)

    YouTube

  2. #2
    Join Date
    Jan 2011
    Location
    BFE Nevada/San Marcos Tx
    Posts
    1,569
    Post Thanks / Like
    Likes (Given)
    1714
    Likes (Received)
    899

    Default

    I think I would want better goggles, especially putting face so close. This vid came into my feed earlier in the week YouTube

  3. Likes PlasmaOnTheBrain liked this post
  4. #3
    Join Date
    Dec 2012
    Location
    Se Ma USA
    Posts
    1,776
    Post Thanks / Like
    Likes (Given)
    143
    Likes (Received)
    982

    Default

    I think I really could put one to work. But curious like a cat.

  5. #4
    Join Date
    Oct 2012
    Location
    Albany Ny USA
    Posts
    433
    Post Thanks / Like
    Likes (Given)
    1510
    Likes (Received)
    209

    Default

    I'd want better goggles.
    Damn curious about it though, id love to know what kind of power it can output. Id also love to cut and etch any of those joints to see what it looks like.

  6. #5
    Join Date
    Dec 2012
    Location
    Se Ma USA
    Posts
    1,776
    Post Thanks / Like
    Likes (Given)
    143
    Likes (Received)
    982

    Default

    Quote Originally Posted by PlasmaOnTheBrain View Post
    I'd want better goggles.
    Damn curious about it though, id love to know what kind of power it can output. Id also love to cut and etch any of those joints to see what it looks like.
    I think the power is limited to 1000 watts. There are several brands to choose from on Alibaba. 1000 watts is about a toasters worth on power, but focused onto a pin point. I cut .120 stainless with 1000 watts, kerf is .1mm, or .03937". Nitrogen blows the molten metal away.

  7. Likes PlasmaOnTheBrain liked this post
  8. #6
    Join Date
    Oct 2012
    Location
    Albany Ny USA
    Posts
    433
    Post Thanks / Like
    Likes (Given)
    1510
    Likes (Received)
    209

    Default

    So the little hand held thingy has half a chance at being useful... Good to know. I'm going on if 1kw will cut, then tuned right 1kw will weld.
    I admit I know more about the arc welding processes vs the directed energy types (laser and electron beam) and I dont have a good scale for comparison, but I know the condensed nature of the energy applied can do a damn good job of melting through various joint's far deeper than the arc welding processes... The only real contender being Plasma Arc Welding... something i've only gotten to read about sadly...

  9. #7
    Join Date
    Feb 2013
    Location
    Northern califorina, usa
    Posts
    379
    Post Thanks / Like
    Likes (Given)
    7
    Likes (Received)
    132

    Default

    Laser welding has been around for quite some time, that said there are some concerns about hand held devises even at low wattage.
    There are hazards not only from beam or specular reflections when viewed directly. As well as direct viewing of diffuse reflections. In addition to eye damage the beam and or it's reflections can also cause skin hazards as well.
    Effective Laser beam welding depends upon absorption of beam energy by the work material. Shiny material surfaces have a higher reflectivity particularly at wavelengths of 10.6um. Temperature also will be a factor in correct laser welding. All welding processes have there inherent dangers that must be addressed. The one thing that stands to me about hand held laser is the danger of beam exposure to the eye, to me this far exceeds the dangers associated with any of the other general welding processes.
    I would say that if one choses to use a hand held laser power source then that extra measure of safety/caution must come into play.

  10. #8
    Join Date
    Jun 2006
    Location
    Near Seattle
    Posts
    4,976
    Post Thanks / Like
    Likes (Given)
    3433
    Likes (Received)
    1422

    Default

    dana gear - my one observation is that the laser welder under discussion is probably a fiber laser, and probably 1.06um rather than 10.6 - a little past 1000nanometers rather than just past 10 microns.
    Aside from changing (a little bit) the demands on the googles one would choose, I don't think it changes anything else you talk about.
    (Uh, it might change how much it causes radiation burns...)

  11. #9
    Join Date
    Apr 2002
    Location
    Syracuse, NY USA
    Posts
    9,783
    Post Thanks / Like
    Likes (Given)
    19
    Likes (Received)
    599

    Default

    we have been discussing getting one of these cheapies off of alibaba and playing with it. note the 1000 units do not appear to make seam welds but intermittent spots. pretty interesting.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •