Kevco
Cast Iron
- Joined
- Apr 8, 2007
- Location
- Farmersville, Ohio
Would like some real world opinions on what manufacture makes a good 4 1/2" angle grinder. I had a Milwaukee but the bearings have died after 2 years and honestly was never really impressed. Milwaukee has seemed to fall into "sell our name" deal as it seems their quality is lacking anymore. I'm I offbase here or have you noticed this too?
About 10 years ago I bought one of their Chopsaws. Motor was VERY weak and only got worse. My Buddy bought a Harbor Freight version and it's a dead ringer for the Milwaukee. Stampings looked like from the same die set and castings as well.
Anyway, any advice on what has worked well for you would be appreciated. Thanks, Kevin
About 10 years ago I bought one of their Chopsaws. Motor was VERY weak and only got worse. My Buddy bought a Harbor Freight version and it's a dead ringer for the Milwaukee. Stampings looked like from the same die set and castings as well.
Anyway, any advice on what has worked well for you would be appreciated. Thanks, Kevin