Cole2534
Diamond
- Joined
- Sep 10, 2010
- Location
- Oklahoma City, OK
I use a decent amount of Innershield wire (.045", NR-211-MP) in some light weldments and the beads look good until I spot, then it always has that fish-eye look to it.
What can I do to prevent these?
In the pic below I was at 108ipm and 17.2v, IIRC, sticking 14ga tube to 1/8" sheet.
Sent via CNC 88HS
What can I do to prevent these?
In the pic below I was at 108ipm and 17.2v, IIRC, sticking 14ga tube to 1/8" sheet.
Sent via CNC 88HS