jackal
Titanium
- Joined
- May 4, 2006
- Location
- northwest ARK
I have a customer that needs 2 of these cones made.
The material is 16 gauge ( .062 thick steel). There aren't any shop around that can roll a cone with a pointed end.
The customer told me it can be flat up to 1/2 on the end for the adjustment screw.
Can someone direct me to metal spinning this?
Possibly over a wooden mandrel?
It is an air inlet control for a boiler.
I asked if it could be made in a brake press( convoluted) with several steps, and he said no.
Thanks
Note:I'm trying to add pictures
The material is 16 gauge ( .062 thick steel). There aren't any shop around that can roll a cone with a pointed end.
The customer told me it can be flat up to 1/2 on the end for the adjustment screw.
Can someone direct me to metal spinning this?
Possibly over a wooden mandrel?
It is an air inlet control for a boiler.
I asked if it could be made in a brake press( convoluted) with several steps, and he said no.
Thanks
Note:I'm trying to add pictures