Anyone know of a good place that can shear beryllium copper sheet?
Our usual company that does these for us had the shear go down.
Sheet is .016" thick, the roll is about 9" wide.
Need 2500 pcs to start, width must be held to .500" +/-.005 I believe and around 8" long-ish.
Recurring job.
Thanks.
Our usual company that does these for us had the shear go down.
Sheet is .016" thick, the roll is about 9" wide.
Need 2500 pcs to start, width must be held to .500" +/-.005 I believe and around 8" long-ish.
Recurring job.
Thanks.
