dkmc
Diamond
- Joined
- Jan 13, 2002
And it interests me mildly. The tag says 10 BWG which is a wee bit thinner than 10 gauge USG. I'd be a lot more interested if it was 48" width not 42". I'm probably not the only guy wondering why the hell they made the width 42" and not 48". And yes, I'm going to look it over closer and 'see' if it looks feasible to install top and bottom blades that are 3" wider on each side. After that insanity moment passes, I'll have to decide if its just to odd to mess with. It'd be more or less a hobby-tinker acquisition.