Vinay Nowal
Plastic
- Joined
- Apr 12, 2012
- Location
- Mumbai, India
Hi, I would first like to introduce myself, as this is my first post on this forum. I'm running an Engineering Workshop in India, offering Fabrication & Galvanizing services catering to various industries.
I'm writing today to seek forum member's advice for a job, where we need to make a 'V' notch at the length edge of a 40 x 40 mm square tube of 1.5 mm thickness, on opposite edges.
The Notch is 37mm along the face of 40mm tube & 15mm along the length of square tube & of 'V' Shape.
We need to process some 2,00,000 square tube pcs with 12,00,000 notches in a span of 5 months and are looking for a quick & error free process or machinery to achieve the same.
Would appreciate generous replies from the members.
I'm writing today to seek forum member's advice for a job, where we need to make a 'V' notch at the length edge of a 40 x 40 mm square tube of 1.5 mm thickness, on opposite edges.
The Notch is 37mm along the face of 40mm tube & 15mm along the length of square tube & of 'V' Shape.
We need to process some 2,00,000 square tube pcs with 12,00,000 notches in a span of 5 months and are looking for a quick & error free process or machinery to achieve the same.
Would appreciate generous replies from the members.