Torchmate help please!!!
Close
Login to Your Account
Results 1 to 7 of 7
  1. #1
    Join Date
    Dec 2017
    Country
    UNITED STATES
    State/Province
    Indiana
    Posts
    3
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    1

    Default Torchmate help please!!!

    I run a torchmate xs2. For some reason, my main program decided to reset itself, and is now adding 1.5 inches to everything i cut. I know its in the programming, but i cant figure out where?

  2. #2
    Join Date
    Oct 2005
    Country
    UNITED STATES
    State/Province
    Pennsylvania
    Posts
    10,248
    Post Thanks / Like
    Likes (Given)
    17320
    Likes (Received)
    5352

    Default

    God this is gonna be like pulling teeth...

    When does it make the 1.5" offset, only new cad files ?
    or take an existing file (that you have already run before) ?

    There's a couple things going on here, need to separate them out.

  3. #3
    Join Date
    Dec 2013
    Country
    UNITED STATES
    State/Province
    New Hampshire
    Posts
    133
    Post Thanks / Like
    Likes (Given)
    45
    Likes (Received)
    68

    Default

    I dont know about the torchmate xs2 but if it uses there torchmate cut software

    You probably have a setup file saved somewhere try <file> <open setup> and look for a .stp file

    If that doesn't work your configurations will be in <configuration> <machine> <mechanics>

  4. #4
    Join Date
    Dec 2017
    Country
    UNITED STATES
    State/Province
    Indiana
    Posts
    3
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    1

    Default

    It only does it to existing files.

    And i dont have a mechanics tab under machine...

  5. #5
    Join Date
    Dec 2013
    Country
    UNITED STATES
    State/Province
    New Hampshire
    Posts
    133
    Post Thanks / Like
    Likes (Given)
    45
    Likes (Received)
    68

    Default

    If it is only doing it to existing files what happens if you re-import the DXF file?

  6. #6
    Join Date
    Dec 2017
    Country
    UNITED STATES
    State/Province
    Indiana
    Posts
    3
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    1

    Default

    Its now saying i have to select a new setup. And torchmate tech support is a damn joke...

  7. #7
    Join Date
    Dec 2013
    Country
    UNITED STATES
    State/Province
    New Hampshire
    Posts
    133
    Post Thanks / Like
    Likes (Given)
    45
    Likes (Received)
    68

    Default

    Im surprised, I have had really good luck with Torchmate techs.

    What version of there cut software are you using?


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •