Hello! Does anyone also encountered when a machine's lithium battery is always, frequently or easily gets low power? Any suggestions on how to troubleshoot this?
We have a turret machine, a PoNZ FC 1250E-32 2.5, where the battery for its X&Y axis easily gets low power. We have replaced the battery, several times already but the two sets recent replacement battery (6V) did not last for a month.
Steps we conducted so far:
1. Rebooting the turret machine, resetting the clamps. Which temporarily fixes the alarm.
2. Replaced the battery set, twice in less than two months. Battery set is rated at 6Vdc (4pc - panasonic lithium batteries).
3. Reported to our tech, but no clear solution after the 2nd battery replacement.
Alarm on turret controller
We have a turret machine, a PoNZ FC 1250E-32 2.5, where the battery for its X&Y axis easily gets low power. We have replaced the battery, several times already but the two sets recent replacement battery (6V) did not last for a month.
Steps we conducted so far:
1. Rebooting the turret machine, resetting the clamps. Which temporarily fixes the alarm.
2. Replaced the battery set, twice in less than two months. Battery set is rated at 6Vdc (4pc - panasonic lithium batteries).
3. Reported to our tech, but no clear solution after the 2nd battery replacement.
Alarm on turret controller