AndyF
Stainless
- Joined
- Nov 3, 2003
- Location
- Phelps, NY, USA
Hello Everyone,
Yesterday I picked up a non-running & incomplete Wysong ironworker. The non-running part should be easily addressed with a new start capacitor on the motor and some rewiring, the incomplete part is looking like it may be a bit more work.
The angle/square/round shear section is missing entirely and the flat bar shear blades are missing.
If you have one of these machines, know where parts might be available or have any literature, parts books, manuals, drawings etc please let me know.
-Thanks Everyone
Yesterday I picked up a non-running & incomplete Wysong ironworker. The non-running part should be easily addressed with a new start capacitor on the motor and some rewiring, the incomplete part is looking like it may be a bit more work.
The angle/square/round shear section is missing entirely and the flat bar shear blades are missing.
If you have one of these machines, know where parts might be available or have any literature, parts books, manuals, drawings etc please let me know.
-Thanks Everyone