Webb Wyman
Stainless
- Joined
- Oct 18, 2001
- Location
- Lewes, DE.
Hi There,
Not too long ago, I picked up a Clausing 5900 lathe
that has a cross feed dial that is calibrated in
both inch and metric. There is come kind of gearing
(I use the term loosely) going on inside that ad-
vances the metirc dial (in relation to the inch
dial) every turn.
Before taking it apart, I wanted a exploded
diagram of it so, I contacted Clausing. They
claim mot to have any information on this ac-
cessory. Anyone seen one of these?
Thanks!
-Blue Chips-
Webb
Not too long ago, I picked up a Clausing 5900 lathe
that has a cross feed dial that is calibrated in
both inch and metric. There is come kind of gearing
(I use the term loosely) going on inside that ad-
vances the metirc dial (in relation to the inch
dial) every turn.
Before taking it apart, I wanted a exploded
diagram of it so, I contacted Clausing. They
claim mot to have any information on this ac-
cessory. Anyone seen one of these?
Thanks!
-Blue Chips-
Webb