AviatorDave
Aluminum
- Joined
- Feb 5, 2008
- Location
- Texas
The used bridgeport I bought a few weeks ago has a Futaba Pulscale CJ2004 DRO on it. Anyone have anything that resembles a manual for it?
It will turn on, and increment when I move the table, but the values are way off. When in inch mode, it goes out to 6 decimal places, but one full turn of the handle only increases the value .040".
I've tried it in absolute mode, incremental mode, everything. There are some buttons that are unreadable, however. I tried to see if any of them made a difference, but none do.
Powering it off, unplugging, and R&R the battery doesn't fix it either.
It will turn on, and increment when I move the table, but the values are way off. When in inch mode, it goes out to 6 decimal places, but one full turn of the handle only increases the value .040".
I've tried it in absolute mode, incremental mode, everything. There are some buttons that are unreadable, however. I tried to see if any of them made a difference, but none do.
Powering it off, unplugging, and R&R the battery doesn't fix it either.