AAB
Banned
- Joined
- Jul 25, 2006
- Location
- Melbourne,Australia
I have an old Nuttall lathe that says 879 & 12.8.49 on the bed & need all the info that I can get.
This subject got a good run in "Australian made machine tools" thinking taht they are Oss made.
I have been told by a couple of U.K. guys that it is from the U.K. but I cannot get anywhere there either.
The lathe swings 14 inches dia & has a 4 ft 3.5 inch bed with a 4.5 inch insert at the chuck end
Regards to all,
AAB
This subject got a good run in "Australian made machine tools" thinking taht they are Oss made.
I have been told by a couple of U.K. guys that it is from the U.K. but I cannot get anywhere there either.
The lathe swings 14 inches dia & has a 4 ft 3.5 inch bed with a 4.5 inch insert at the chuck end
Regards to all,
AAB