2Slow
Hot Rolled
- Joined
- Jun 26, 2006
- Location
- South East Michigan, USA
I will soon be refinishing a Bridgeport mill and an Oliver lathe. I would like to paint both a dark gray. I am not fussy about the paint being an exact match to original colors.
Does anyone have advise as to what paint to use? I would like to stay away from rattle cans.
Thanks in advance,
-Joe
Does anyone have advise as to what paint to use? I would like to stay away from rattle cans.
Thanks in advance,
-Joe
Attachments
-
photo (49).jpg95.3 KB · Views: 2
-
Sleeve gear - right hand side.jpg90.7 KB · Views: 2
-
Sleeve gear overall.jpg93.7 KB · Views: 2
-
QC Gearbox - Dirty.jpg99 KB · Views: 2
-
QC Gearbox - Entire Assembly.jpg88 KB · Views: 2
-
QC Gearbox diagram - Rascal.jpg92.5 KB · Views: 2
-
gearbox installed.jpg94 KB · Views: 2
-
sleeve gear dissasembly.jpg93.6 KB · Views: 2
-
Gouge on shaft.jpg82.3 KB · Views: 2