emt2688
Cast Iron
- Joined
- Mar 6, 2006
- Location
- NE Nebaska
Have to tap 1"-8 holes in 4140.
Hole depth is too deep to thread mill, so I have to resort to hand tapping
Which will be easier on my body, a plug tap or a taper tap?
Luckily, there's only 8 holes.
Hole depth is too deep to thread mill, so I have to resort to hand tapping
Which will be easier on my body, a plug tap or a taper tap?
Luckily, there's only 8 holes.