indmachrep
Hot Rolled
- Joined
- Nov 29, 2003
- Location
- Redland(Miami) Fl
http://photobucket.com/albums/v366/indmachrep/?action=view¤t=DCP_0035.jpgs looks like an r8 but is threaded.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
what type of collet is this
- Thread starter indmachrep
- Start date
- Replies 6
- Views 1,354
indmachrep
Hot Rolled
- Joined
- Nov 29, 2003
- Location
- Redland(Miami) Fl
if you can see photo hit next on the page and it will show
indmachrep
Hot Rolled
- Joined
- Nov 29, 2003
- Location
- Redland(Miami) Fl
bbfmetalworking
Aluminum
- Joined
- Dec 6, 2003
- Location
- TX
Could you provide some dimensions please?
indmachrep
Hot Rolled
- Joined
- Nov 29, 2003
- Location
- Redland(Miami) Fl
this collet says "Davenport Machine Tool CO Rochester N.Y." from the threaded end to the end of the taper it measures about 4.3" the threaded area is .850" the body just above the thread measures .871" above that it steps down and measures .810. it has no master spline and the collet sAYS IT IS SIZE .143 AND IT HAS THREE BLIND HOLES ON THE COLLET FACE. what other info do you guys need
ARFF79
Hot Rolled
- Joined
- Oct 3, 2003
- Location
- S.E. Pa., USA
Sounds to me like a collet for a Davenport 5 spindle screw machine. It does not need a key as it is screwed into a draw tube that is opened and closed with a cammed actuator and it is for .143 diameter stock.
indmachrep
Hot Rolled
- Joined
- Nov 29, 2003
- Location
- Redland(Miami) Fl
Is this a popular machine or was it a popular machine.
