Indyglyder
Plastic
- Joined
- Apr 11, 2021
Hi, I just acquired a 9" x 4' south bend lathe and it came with a bunch of tooling, not sure if im keeping or selling yet. I have two sets of collets for the headstock spindle and I'm trying to figure out what kind of collets they are.
the first picture shows the collets that attach to the back of the hand wheel that goes through the spindle with threads.
most of these say hardinge or south bend brand. these have a keyway only in the top tappered section, not the main shaft.
the second set mount inside the collet chuck, most of these are made by Grand and are german made.
do I need both types? or is one for a different use.
the first picture shows the collets that attach to the back of the hand wheel that goes through the spindle with threads.
most of these say hardinge or south bend brand. these have a keyway only in the top tappered section, not the main shaft.
the second set mount inside the collet chuck, most of these are made by Grand and are german made.
do I need both types? or is one for a different use.