I’m wanting to build an aluminum framed table (18”H x 48”L x 30”W) that can hold a weight of about 300 lbs. This will be a fire pit table, so my joints can’t be those composite T fasteners. I was curious what the best method would be for adjoining the tubing pieces that meet.
I have access to plenty of 1” and 1.5” square aluminum tubing as well as the 90 angle.
Some of the common methods I’ve seen are adhesives, rivets and nut/bolt.
I have access to plenty of 1” and 1.5” square aluminum tubing as well as the 90 angle.
Some of the common methods I’ve seen are adhesives, rivets and nut/bolt.