beckerkumm
Hot Rolled
- Joined
- Aug 5, 2014
- Location
- Wisconsin Rapids WI
My Smart and Brown 1024 came with an Algra type A tool post. I also found some holders at an auction. Both, to my surprise used 3/8 UNC square headed but regular screws. The ends of the screws were smushed up so I removed them all and cleaned them up with a grinder and die. I would have thought a dog point or some type of set screw with a cone type tip would have been used to avoid mucking up the screw. I want to replace all so the heads match and looking for advice as to the type of point that should be used or if a regular screw is really appropriate. Thanks, Dave