MwTech Inc
Titanium
- Joined
- Feb 6, 2005
- Location
- Fishersville VA
After repeated calls to Collis I cant get any info...................
With the addition of the radial drill in the shop I picked up a clean used 5mt #4 master and one new collet, just to look at it and study.
This is the series that uses 2 3/8 dia collets
With the master in the spindle and a 2" twist in the collet I am getting .125 min "slop" at the tip of the drill bit. (14" from master to tip of drill)
Seems to much??? Looking to drill many holes and tap 16mm that need to be on 2.00 centers, no room for that kind of slop.
With the addition of the radial drill in the shop I picked up a clean used 5mt #4 master and one new collet, just to look at it and study.
This is the series that uses 2 3/8 dia collets
With the master in the spindle and a 2" twist in the collet I am getting .125 min "slop" at the tip of the drill bit. (14" from master to tip of drill)
Seems to much??? Looking to drill many holes and tap 16mm that need to be on 2.00 centers, no room for that kind of slop.