woodstove
Plastic
- Joined
- Jul 23, 2019
For non-commercial use. What are you initial thoughts, two choices from the same manufacturer. The cheaper one is their older model. Better value? Short-sighted? Neither?
A) Centre Lathe D1-4 camlock $7029 AUD ($5,119.22 USD)
12" over bed
7" over cross slide
3.5" compound travel
36" between centers
1.5" bore
1034 lbs
2hp 70-1400rpm single phase
threading dial
2 axis dro with absolute scales
gear box requires manually removed change gears to switch between metric and imperial, additionally metric threading range is spread over 3 separate change gear configurations
B) Centre Lathe D1-4 camlock $10879 AUD ($7,923.18 USD)
14" over bed
9" over cross slide
4" compound travel
39" between centers
1.5" bore
1543 lbs
2hp 82-2000rpm single phase
threading dial
2 axis dro with absolute scales
gear box requires manually removed change gears to switch between metric and imperial, all metric threading range is on a single change gear configuration
There is a separate $869 AUD ($631.89 USD) 12" taper turning attachment available for both so compound travel is not required for tapers.
And, both are the same when left configured for imperial threading, all available at once through the gear box knobs.
A) Centre Lathe D1-4 camlock $7029 AUD ($5,119.22 USD)
12" over bed
7" over cross slide
3.5" compound travel
36" between centers
1.5" bore
1034 lbs
2hp 70-1400rpm single phase
threading dial
2 axis dro with absolute scales
gear box requires manually removed change gears to switch between metric and imperial, additionally metric threading range is spread over 3 separate change gear configurations
B) Centre Lathe D1-4 camlock $10879 AUD ($7,923.18 USD)
14" over bed
9" over cross slide
4" compound travel
39" between centers
1.5" bore
1543 lbs
2hp 82-2000rpm single phase
threading dial
2 axis dro with absolute scales
gear box requires manually removed change gears to switch between metric and imperial, all metric threading range is on a single change gear configuration
There is a separate $869 AUD ($631.89 USD) 12" taper turning attachment available for both so compound travel is not required for tapers.
And, both are the same when left configured for imperial threading, all available at once through the gear box knobs.