Piechomper
Plastic
- Joined
- Apr 9, 2017
- Location
- Yorkshire England
Hello guys, I was interested to know if any of you have had to do headstock alignment checks on a Binns and Berry trident L1000. Our machine is tapering near the headstock 0.009” in 9 inches as I am boring out some parts. The bore is 3.5” in diameter and I am using a 2”” diameter boring bar so I don’t think it’s boring bar flex. I can’t see any means of adjusting the headstock side to side like most lathes to tune out the taper. This machine has caused me nothing but headaches for the last 5 years with one problem after another. Any suggestions would be really appreciated as the machine manual tells me nothing at all.