Greenlee52
Aluminum
- Joined
- Apr 7, 2020
- Location
- Theodore, AL, USA
This lathe chuck has a back plate that fits a 13" South Bend Lathe 2-1/4"x8" /TPI but I am guessing that it would fit any brand
name with the same spindle threaded nose. I was looking on eBay for a 3 jaw scrolling chuck near 8" in diameter. I found this
one for $149.00 and a shipping cost of around $21.00. I did not read the small print saying it was non-scrolling. It is in great
condition but I have searched YouTube for an explanation and there is none there to be found. I have a 12.5" 4 jaw chuck and
a 10" 4 jaw chuck and over 53 5C collets up to 1-1/16". My guess is that no one will be interested in this 3 jaw so it's
important to learn the method of adjusting it to zero with a piece of round or odd shaped piece in it and not take all day to do so. I have labeled myself as so feel free to join in.
If it's too much to deal with for a beginner then I will take a big loss apparently. You would think I'd be used to it by now.
Maybe it can be modified for another use, I really don't know. Any suggestions are welcome.
What's the lowest beginner point for members and then the next 3 under that?
name with the same spindle threaded nose. I was looking on eBay for a 3 jaw scrolling chuck near 8" in diameter. I found this
one for $149.00 and a shipping cost of around $21.00. I did not read the small print saying it was non-scrolling. It is in great
condition but I have searched YouTube for an explanation and there is none there to be found. I have a 12.5" 4 jaw chuck and
a 10" 4 jaw chuck and over 53 5C collets up to 1-1/16". My guess is that no one will be interested in this 3 jaw so it's
important to learn the method of adjusting it to zero with a piece of round or odd shaped piece in it and not take all day to do so. I have labeled myself as so feel free to join in.
If it's too much to deal with for a beginner then I will take a big loss apparently. You would think I'd be used to it by now.
Maybe it can be modified for another use, I really don't know. Any suggestions are welcome.
What's the lowest beginner point for members and then the next 3 under that?