Mercury2005
Plastic
- Joined
- Sep 20, 2019
I am a novice machinist and recently purchased a 1965 Clausing 13x36 lathe.
Need help to understand how to change the oil in the apron as I see no drain at all.
I see a drain on the headstock so I can proceed with that one.
Also need a recommendation for oil for headstock and apron.
Any suggestions would be appreciated.
Thanks
Need help to understand how to change the oil in the apron as I see no drain at all.
I see a drain on the headstock so I can proceed with that one.
Also need a recommendation for oil for headstock and apron.
Any suggestions would be appreciated.
Thanks